1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Ads can be a pain, but they are our only way to maintain the server. Your patience is highly appreciated and we hope our service can be worth it.

I4 QMobile i4 Flash File

Discussion in 'QMobile - FAQ, Guide, How To, Tutorials' started by Manni Bakshi, Jun 5, 2016.

Tags:
  1. Manni Bakshi

    Manni Bakshi Junior Member
    Pakistan
    Verified ✔ Registered ✔

    Joined:
    Mar 27, 2016
    Messages:
    39
    Likes Received:
    30
    Trophy Points:
    18
    Gender:
    Male
    Code:
     ====  Wait for phone...
    
    Phone found! [ 103 ]
    Port Opened
    Sync...
    Initial Boot Failed!
    
    Reconnect Power/Cable!
    
    
    Infinity SC Firmware Detected
    FW Size : 1239 MiB
    Load Ok!
    
    Operation : Flash [ v1.17 ]
    
    ======= Flash
    Files set for flashing :
    [ MCU ] : SC77xx Infinity Package
    
    1. Remove battery. Insert battery back
    2. Press and hold 'VolumeUp' and 'VolumeDown' keys
    3. Insert cable
    
    ====  Wait for phone...
    
    Phone found! [ 103 ]
    Port Opened
    Sync...
    Initial Boot Failed!
    
    Reconnect Power/Cable!
    
    
    Operation : Flash [ v1.17 ]
    
    ======= Flash
    Files set for flashing :
    [ MCU ] : SC77xx Infinity Package
    
    1. Remove battery. Insert battery back
    2. Press and hold 'VolumeUp' and 'VolumeDown' keys
    3. Insert cable
    
    ====  Wait for phone...
    
    Phone found! [ 103 ]
    Port Opened
    Sync...
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync...
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds - remove cable
    FDL Ready!
    Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    
    FlashMode Set : Ok!
    
    PMTManager : Load 0x17 records
    PMTManager : PMT Update Ok!
    Flashing now
    
    Update BootCode : u-boot-spl-16k.bin
    Write Data ...
    Write Data Ok!
    
    Update BootCode : u-boot.bin
    Erase block ...
    Block erase Ok!
    Write Data ...
    Write Data Ok!
    
    Write FSImage : prodnv.img
    Write Data ...
    Write Data Ok!
    
    Erase Block : RuntimeData
    Erase block ...
    Block erase Ok!
    
    Erase Block : RuntimeData
    Erase block ...
    Block erase Ok!
    
    Erase Block : RuntimeData
    Erase block ...
    Block erase Ok!
    
    Erase Block : RuntimeData
    Erase block ...
    Block erase Ok!
    
    Write CodeData : sc7731g_CP0_modem.bin
    Write Data ...
    Write Data Ok!
    
    Write CodeData : DSP_DM_Gx.bin
    Write Data ...
    Write Data Ok!
    
    Write CodeData : sc8830g_modem_CP2_WCN_14D_W15.16_Release.bin
    Write Data ...
    Write Data Ok!
    
    Write CodeData : logo_540x960.bin
    Write Data ...
    Write Data Ok!
    
    Write CodeData : fblogo_540x960.bin
    Write Data ...
    Write Data Ok!
    
    Write CodeData : boot.img
    Write Data ...
    Write Data Ok!
    
    Write FSImage : system.img
    Write Data ...
    Write Data Ok!
    
    Write FSImage : cache.img
    Write Data ...
    FSImage : Make and Flush SPImage
    Write Data Ok!
    
    Write CodeData : recovery.img
    Write Data ...
    Write Data Ok!
    
    Process : Flush
    Flush Ok!
    
    Write FSImage : userdata.img
    Write Data ...
    FSImage : Make and Flush SPImage
    Write Data Ok!
    
    
    Elapsed: 00:05:22
    
    Reconnect Power/Cable!
    
    
    Infinity SC Firmware Detected
    FW Size : 1018 MiB
    Load Ok!
    
    Operation : Flash [ v1.17 ]
    
    ======= Flash
    Files set for flashing :
    [ MCU ] : SC77xx Infinity Package
    
    1. Remove battery. Insert battery back
    2. Press and hold 'VolumeUp' and 'VolumeDown' keys
    3. Insert cable
    
    ====  Wait for phone...
    
    Phone found! [ 103 ]
    Port Opened
    Sync...
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync...
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds - remove cable
    FDL Ready!
    Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    
    FlashMode Set : Ok!
    
    PMTManager : Load 0x18 records
    PMTManager : PMT Update Ok!
    Flashing now
    
    Update BootCode : u-boot-spl-16k.bin
    Write Data ...
    Write Data Ok!
    
    Update BootCode : u-boot.bin
    Erase block ...
    Block erase Ok!
    Write Data ...
    Write Data Ok!
    
    Write FSImage : prodnv.img
    Write Data ...
    Write Data Ok!
    
    Write CodeData : sc7731g_CP0_modem.bin
    Write Data ...
    Write Data Ok!
    
    Write CodeData : DSP_DM_Gx.bin
    Write Data ...
    Write Data Ok!
    
    Erase Block : RuntimeData
    Erase block ...
    Block erase Ok!
    
    Write CodeData : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
    Write Data ...
    Write Data Ok!
    
    Erase Block : RuntimeData
    Erase block ...
    Block erase Ok!
    
    Write CodeData : logo_480x854.bin
    Write Data ...
    Write Data Ok!
    
    Write CodeData : fblogo_480x854.bin
    Write Data ...
    Write Data Ok!
    
    Write CodeData : boot.img
    Write Data ...
    Write Data Ok!
    
    Write FSImage : system.img
    Write Data ...
    Write Data Ok!
    
    Write FSImage : cache.img
    Write Data ...
    FSImage : Make and Flush SPImage
    Write Data Ok!
    
    Write CodeData : recovery.img
    Write Data ...
    Write Data Ok!
    
    Process : Flush
    Flush Ok!
    
    Write FSImage : userdata.img
    Write Data ...
    FSImage : Make and Flush SPImage
    Write Data Ok!
    
    Erase Block : INTERNALSD
    Erase block ...
    Block erase Ok!
    
    
    Elapsed: 00:07:46
    
    Reconnect Power/Cable!
    SP7731GEA_i4_4.4.2_QMobilei4_MP_01_07
     
    • Like Like x 1
    Loading...