1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Qmobile A290 White Display Problem Solved Only cm2 preloder write other xyx Faild

Discussion in 'Chinese Models - Cloned Phones' started by Naman Orton, Jul 25, 2016.

  1. Naman Orton

    Naman Orton New Member

    Joined:
    Jul 17, 2016
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    here log flahs

    Operation : Flash [ v1.53 ]

    ======= Flash
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 20 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x0005
    BLVersion : 0x00FE
    PreLoader : NOT Active [ Erased ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A48344732611101539B1164625B
    Initialize Memory ...
    DRAM configured from ScatFW!
    DRAM initialize passed!
    DRAM size : 0x20000000
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , a2G4
    [eMMC] : FLASH_CID : 90014A48344732611101539B1164625B
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID : 0x07F2BD7FA932EEA0723D01563945919E
    INT RAM : 0x00020000
    EXT RAM : 0x20000000 [512 MiB]
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    ScatCFG : BaseBand : MT6572 , Project : s5201ap , Storage : EMMC
    Setting : Flash Pre-Erase : Off ( Write Flash Only )
    Setting : AFF verify : Disabled
    Setting : HW verify : Disabled

    Switching to HSUSB
    HSUSB Init Ok
    BL : Check HW compatibility
    BL : BBID supported by BootLoader!
    BL : Skip checking by User request!

    BL : BatteryLevel : 3543 mV
    BL : [WARNING] : BatteryLevel LOW!!!

    SecCfg Passed , 1799
    BMT remark not need. Will skip
    Sending Preloader ...
    Use : preloader_s5201ap.bin
    Preloader Sent , Init passed
    SecCfg Passed , 1799
    PartCount : 0013

    Processing : Flash Write
    Flash now : MBR
    Image Flash Ok
    Flash now : EBR1
    Image Flash Ok
    Flash now : UBOOT
    Image Flash Ok
    Flash now : BOOTIMG
    Image Flash Ok
    Flash now : RECOVERY
    Image Flash Ok
    Flash now : SEC_RO
    Image Flash Ok
    Flash now : LOGO
    Image Flash Ok
    Flash now : ANDROID
    Image Flash Ok
    Flash now : CACHE
    Image Flash Ok
    Flash now : USRDATA
    Image Flash Ok
    Flash Write Done, time used : 00:02:40


    Update RomInfo done

    Done!
    Elapsed: 00:02:58
    Reconnect Power/Cable!

    Read INFO Show Prelder Erase Not Active

    Wait for phone...
    Phone found! [ 20 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x0005
    BLVersion : 0x00FE
    PreLoader : NOT Active [ Erased ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A48344732611101539B1164625B
    Initialize Memory ...
    DRAM configured from ScatFW!
    DRAM initialize passed!
    DRAM size : 0x20000000
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , a2G4
    [eMMC] : FLASH_CID : 90014A48344732611101539B1164625B
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID : 0x07F2BD7FA932EEA0723D01563945919E
    INT RAM : 0x00020000
    EXT RAM : 0x20000000 [512 MiB]
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    [AP] : Initial info read Ok!

    Brand : QMobile
    ProdName : QMobile A290
    ProdModel : QMobile A290
    Device : QMobile A290
    AndroidVer: 4.4.2
    MTKxCPU : MT6572
    MTKxPRJ : ALPS.KK1.MP7.V1

    MODEM :
    BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_1_wg_n

    EXTRA :
    LCD [0] : ili9806e_fwvga_dsi_vdo_txd
    LCD [1] : hx8379c_fwvga_dsi_vdo_tcl
    LCD [2] : ili9806e_fwvga_dsi_vdo_dj
    LCD [3] : ili9806e_fwvga_dsi_vdo_glass
    LCD Res : 854x480
    TOUCH [0] : GT9XX
    CAM [0] : ov5645_mipi_yuv
    CAM [1] : ov5646_mipi_yuv
    CAM [2] : sp0a19_yuv
    CAM [3] : gc0329_yuv
    CAM [4] : hi258_mipi_yuv
    MODEM : mt6572_s5201ap_hspa_gemini_PK
    LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG th_TH pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB ur_PK fa_IR hdpi -sw600dp -sw720dp

    Done!
    Elapsed: 00:00:14
    Reconnect Power/Cable!

    Finish at : [7/25/2016 / 5:23:15 PM]

    Then Preloder Wrie .... here is log


    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 20 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x0005
    BLVersion : 0x00FE
    PreLoader : NOT Active [ Erased ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A48344732611101539B1164625B
    Initialize Memory ...
    DRAM configured from ScatFW!
    DRAM initialize passed!
    DRAM size : 0x20000000
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , a2G4
    [eMMC] : FLASH_CID : 90014A48344732611101539B1164625B
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID : 0x07F2BD7FA932EEA0723D01563945919E
    INT RAM : 0x00020000
    EXT RAM : 0x20000000 [512 MiB]
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    SecCfg Passed , 1799
    BL : BBID supported by BootLoader!
    Supported HW by Preloader :
    FlashID [0] CID : 90014A483447316404 , Name : H4G1d , Vendor : 90 , [HYNIX]
    FlashID [1] CID : 90014A483447326111 , Name : H4G2a , Vendor : 90 , [HYNIX]
    BL : Storage supported by BootLoader!
    Sending BootLoader ...
    Preloader Sent , Init passed
    SecCfg Passed , 1799
    PartTable Init Ok , Count : 14
    All Done

    Done!
    Elapsed: 00:00:08
    Reconnect Power/Cable!

    Finish at : [7/25/2016 / 5:25:09 PM]

    And Wipe and Format ...........

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 20 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x0005
    BLVersion : 0x00FE
    PreLoader : NOT Active [ Erased ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A48344732611101539B1164625B
    Initialize Memory ...
    DRAM configured from ScatFW!
    DRAM initialize passed!
    DRAM size : 0x20000000
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , a2G4
    [eMMC] : FLASH_CID : 90014A48344732611101539B1164625B
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID : 0x07F2BD7FA932EEA0723D01563945919E
    INT RAM : 0x00020000
    EXT RAM : 0x20000000 [512 MiB]
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!


    Clear RDP
    Clear Ok!

    Done!
    Elapsed: 00:00:12
    Reconnect Power/Cable!

    Finish at : [7/25/2016 / 5:27:16 PM]

    Start at : [7/25/2016 / 5:27:45 PM]
    Operation : Format FileSystem [ v1.53 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 20 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x0005
    BLVersion : 0x00FE
    PreLoader : NOT Active [ Erased ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A48344732611101539B1164625B
    Initialize Memory ...
    DRAM configured from ScatFW!
    DRAM initialize passed!
    DRAM size : 0x20000000
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , a2G4
    [eMMC] : FLASH_CID : 90014A48344732611101539B1164625B
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID : 0x07F2BD7FA932EEA0723D01563945919E
    INT RAM : 0x00020000
    EXT RAM : 0x20000000 [512 MiB]
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!


    Clear USERDATA
    Clear Ok!
    Clear CACHE
    Clear Ok!

    Done!
    Elapsed: 00:01:02
    Reconnect Power/Cable!

    Finish at : [7/25/2016 / 5:28:48 PM]
     
    Loading...