You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Click here to Login / Register
Separate names with a comma.
Discussion in 'Acer - FAQ, Guide, How To, Tutorials' started by GsmDude, Feb 22, 2014.
Acer m900 hard reset procedures
Acer Z2 Liquid hard reset
1.Shutdown the phone
2.Power it on with Power + Vol- (will appear Acer logo and the phone will vibrate)
3.Once it vibrates, release Vol- and push Vol+.
4.The phone will vibrate again, release Vol + it will boot in recovery mode.
5.Use Vol- & Vol+ to highlight "Wipe data/factory reset" and use meniu to select.
6.Confirm "yes - delete all data".
Acer S500 hard reset
1.Power off the phone
2.Power on with Power + Vol down (Acer logo will appear and the phone will vibrate after 2sec.)
3.Once it vibrates, release Vol down and push Vol up
4.The phone will vibrate again, release Vol up, it will boot in recovery mode.
5.Use Vol down and Vol up to select "Wipe data/factory reset" and then use Power to select it.
7.Once done, reboot the "cleaned" phone.
acer E130 hard reset procedure
If you want to reset your ACER beTouch E130 you need:
1.Switch off your phone
2.hold on 3 buttons-''volume up''+power+button"answering a call"
3. You will see a menu where select "data reset" or something like that(by the way,you can control a menu by a trackball)
4.Most likely, your phone should reboot itself, if not, pull out the battery
PS If after hard reset,your phone displays black screen with some information about battery and smth else,try a next combination of buttons:turn off your phone >Press and hold the Volume up and Volume down buttons.>press and hold the Power until you feel your smartphone vibrate and/or you see the Acer logo screen.
In that order!
Acer Liquid s100 Hard Reset
A full reset is sometimes referred to as a hard reset. Perform a full reset when you want to clear all settings, programs and data from RAM.
Caution if you perform a full reset, your Acer Liquid s100 returns to its default settings and looses all information that is not recorded in ROM.
To perform a hard reset:
Turn off your phone, then press and hold the Power until you feel your smartphone vibrate and/or you see the Acer logo screen.
Press and hold theVolume up and Volume down buttons.
Use the Volume up button to select Clean boot:YES.
Press the camera button to confirm.
Acer Iconia A100 Tablet Hard Reset
Press & hold down the Volume UP button + Power button
when the tablet vibrates release the Power button Only
You have to release the power switch in 3 seconds (no more, no less).
You have to continue to hold the volume up button after releasing the power button.
You have to quickly work the screen lock switch as soon as the tablet vibrates as directed in step 5 (still holding the volume button, but not the power button).
At step 6, when you see the following two messages briefly in the upper left corner of the screen, you have been successful:
Erasing user data...
If the tablet shows a recovery error or any other unexpected condition, you may have made some mistake in the procedure. For example, if you hold the power button too long this can cause the device to go into a recovery mode. If you encounter this, don't worry. This is a common and correctable mistake. In such a case, just restart the procedure at Step 1. The procedure can take several practice runs to complete successfully. What follows is the step by step procedure.
Acer Liquid Z110
Warning! All data will be deleted!
1. Power off the phone
2. Press together volume up + power button until Acer logo will appear and the phone will vibrate after 2sec.
3. Once it vibrates, release the keys.
4. Use volume buttons to select "Clear flash" and then press the middle button to select it.
5. Wait until the phone restarts